- Contact Person : Mr. huang leo
- Company Name : Yueqing Hengwei Electric Co., Ltd.
- Tel : 86-577-62799662
- Fax : 86-577-62799291
- Address : Zhejiang,Wenzhou,Xinguang industrial zone,Yueqing city
- Country/Region : China
- Zip : 325604
HS-25W switching power supply
25W switching power supply
Features:·170~264VAC AC input
·Small volume,low weight,high efficiency
·Protections:short circuit/over load
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Year warranty
Model | HS-25-12 | HS-25-15 | HS-25-24 | ----- | |
output | DC voltage | 12V | 15V | 24V | ----- |
Voltage tolerance | ±1% | ±1% | ±1% | ----- | |
Rated current | 2.1A | 1.7A | 1.1A | ----- | |
Current range | 0~1.3A | 0~1.7A | 0~1.1A | ----- | |
Rated power | 25.2W | 25.5W | 26.4W | ----- | |
Ripple&noise | 100mvp-p | 120mvp-p | 150mvp-p | ----- | |
DCvoltage ADJ.range | ±10% | ±10% | ±10% | ----- | |
input | Voltage range | 170~264VAC,235~373VDC | |||
frequency | 47~63HZ | ||||
AC current | 0.35A/230VAC | ||||
efficiency | 78% | 78% | 80% | ----- | |
Inrush current | Cold start current 30A/230VAC | ||||
Leakage current | < 0.5mA/240VAC | ||||
protection | overload | Rated output power110%~135% start over load protection | |||
protection type :part layer type current limit ,auto-recovery after fault condition is removed | |||||
----- | ----- | ||||
----- | |||||
environment | Working temp,humidity | -10°C~+60°C,20%~90%RH | |||
Storagetemp,humidity | -20°C~+85°C,10%~95%RH non-condensing | ||||
Withstand vibration | 10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes | ||||
safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC | ||||
Fitstandard | Safety standard | Fit UL1012 | |||
EMC standard | Fit EN55022,CLASSA | ||||
others | Dimension | 84*58*38mm (L*W*H) | |||
Weight/packing | 0.15kg/80pcs/13kg/0.024m³/0.87CUFT | ||||
note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||
HS-25W switching power supply